Modulus Kit
$32.99
Modulus Kit Includes:
- (x1) 16-position female connector header, 2.54mm, right angle
- (x1) 40-position male connector header, 2.54mm, right angle
- (x1) 10k ohm trimmer potentiometer
- (x1) 10-segment LED bar graph
- (x1) 1.2k ohm resistor array (pull-up or pull-down resistors for switch array)
- (x1) 470 ohm resistor array (series resistors for LED bar graph)
- (x2) 3-pin, (x1) 4-pin, (x1) 6-pin right angle connector and housing
- (x15) 22-30AWG crimps for connectors
- (x2) 10-position female socket, 2.00mm
- (x2) 10-position female connector header, 2.00mm
- (x1) 40-position male connector header, 2.00mm, right angle
- (x2) 10-position male connector header, 2.00mm
*Wire-wrap wire, jumpers, sensors, resistors not included.
Optional Crystalfontz 16×2 Character LCD Specs:
- 4-bit or 8-bit parallel interface
- Yellow-green LED backlight
- Dimensions: 72mm x 36mm x 14mm
- Industry-standard HD44780 controller
Out of stock
Description
The Modulus Kit is essential for your Modulus Canister. It comes with a variety of male and female headers and connectors, with both 2.54mm and 2.00mm pitches. You can layout your Modulus any way you want and stack as many as you want. We recommend using 30 AWG wire wrap wire and a wire wrap tool instead of jumper wires. If you use jumper wires, you will not be able to stack multiple Canisters.
Additional information
| Weight | 0.10 lbs |
|---|---|
| Dimensions | 4.0 × 3.0 × 0.5 in |
Be the first to review “Modulus Kit”
Reviews
There are no reviews yet.